This glued laminated timber was salvaged from the roof structure of one of the former 'BOMACO' warehouses in Relegem. Originally used as a structural elements, these pine beams have been first inspected on site to remove any remaining screws or nails, then sawn parallel to the large face to create panels.
Length | min. 245 cm |
Width | 97 cm (± 2 cm) |
Thickness | 3 - 4 cm / 4 - 4,5 cm / 5,5 - 6 cm |
We have 3 different thicknesses :
- the thin panels (3 to 4 cm) have one sawn side and one original side
- the medium thick panels (4 to 4,5 cm) have a sawn finish on both sides
- the thick panels (5,5 to 6 cm), have one sawn side and one original side
Rough sawn (not sanded nor planed). Please note that variations in thickness occur not only between panels but also within a single panel. Some warping, known as 'cupping', may occur across the width of the panel, with the edges being higher or lower than the centre.
Good used condition. There are visible imperfections, scratches, small cracks on the edges or some holes.
We only sell the entire panel but an extra rough cutting service is available. You can contact our customer service after the purchase for more precisions. In order to prepare your order in the best possible way, our team will need some delay from the day of your order. Please note that once the panel is cut no order return is possible.
The panels are delivered by our team, without prior selection in our warehouse.